Saturday, August 12, 2023

 Surfing Monkey


Stampin' Up! Supplies

The paper:

  • Basic White Thick Cardstock 8-1/2" x 5-1/2", scored at 4-1/4" on the long side
  • Basic White 5-1/2" x 3"
  • Basic White Scraps
  • Hello, Irresistible Designer Series Paper (DSP) 4" x 5-1/4" (sky colored for background)
  • Hello, Irressitible Designer Series Paper (DSP) 5-1/2" x 3" (Pretty Peacock design)
  • Pretty Peacock 5-1/4" x 3"
  • Pecan Pie scrap
  • Crumb Cake Scrap
  • Flirty Flamingo Scrap
The Stamps and Stamp Pads:
  • Pretty Peacock Ink Pad
  • Little Monkey Stamp Set
  • Waves of Inspiration Stamp Set
Cutting Tools:
  • Little Monkey Punch
  • Waves Dies
  • Scissors
Adhesives:
  • Multipurpose Liquid Glue
  • Stampin' Dimensionals
Other:
  • Wink of Stella
  • Rhinestone Basic Jewels
The Instructions

  • Adhere sunset colored DSP to the card front.
  • Die cut one wave with Basic White and the other with Pretty Peacock.
  • Glue the waves onto Pretty Peacock DSP. 
  • Cut around the waves.
  • Adhere the waves to the left, bottom corner of the background.
  • Stamp the hanging monkey on Pecan Pie paper. Stamp the head of the monkey in Crumb Cake. Stamp a leaf in Flirty Flamingo. Cut them out.
  • Glue the face on the monkey. Glue the leaf on the card front.
  • Attach the monkey with dimensionals.
  • Die cut the small label from the Waves Dies. Stamp greeting on label. Attach label with dimensionals.
  • Die cut two clouds (optional). Cut to desired size and adhere.
  • Stick three Rhinestone Basic Jewels on card.
  • Paint Wink of Stella on the wave die cuts and the leaf.
  • Enjoy!
Click on any of the pictures below to see details about the products used and to link directly to my Stampin' Up store!

Product List

Monday, August 7, 2023

FESTIVE CHRISTMAS

 Festive Christmas


I don't know about you, but I have to start early to get my many Christmas cards done on time.

Stampin' Up Supplies

The paper:

  • Boho Blue: 5-1/2" x 11", scored on the long side at 1/2", 4", 4-1/2" and 8"
  • Boho Blue: 4" x 5-1/2"
  • Boho Blue: a scrap
  • Basic White: 5: x 3-1/4" 
  • Basic White: a piece from the smallest Deckled Rectangle die.
  • One Horse Open Sleigh Designer Series Paper (DSP): 3-1/2" x 5" for the outside of the card, design vertically oriented 
  • One Horse Open Sleigh DSP: 3-1/4" x 4-3/4" for the inside of the card, vertically oriented
  • One Horse Open Sleigh DSP: a piece cut from the smallest Deckled Rectangle die.
The Stamps, Stamp Pads and Markers:
  • Trucking Along Stamp Set
  • Lost Lagoon Stamp Pad
  • Momento Black Ink
  • Mossy Meadow Stamp Pad
  • Misty Moonlight Stamp Pad
  • Night of Navy Stamp Pad
  • Black Stampin' Write Marker
  • Light Pool Party Stampin' Blend Marker (optional)
  • Light Smoky Slate Stampin' Blend Marker
  • Light Lost Lagoon Stampin' Blend Marker
Cutting Tools:
  • Trucking Along Builder Punch
  • Scissors
  • Deckled Rectangles Dies
Adhesives:
  • Multipurpose Liquid Glue
  • Stampin' Dimensionals
  • Tear & Tape
  • Mini Glue Dots
Other:
  • White Bakers Twine
  • Adhesive Backed Snowflakes

The Instructions:

  • Stamp two pick-up trucks, one in Night of Navy ink and one in Misty Moonlight ink. Color the steering wheels and tires with the black Stampin' Write marker. Color the center of the tires with Light Smoky Slate Stampin' Blends marker. 
  • Punch out the truck.
  • Stamp the Christmas tree outlines in black. Stamp them in with Mossy Meadow ink.
  • Glue the trees in the back of the trucks.

  • Look at the card with the 1/2" section on the right. Cut the third largest deckled rectangle out of the top portion of the adjoining window as shown. The next panel to the left is also 1/2". In the following panel to the left adhere the 3-1/4" x 4-3/4" piece of DSP.
  • On the back side of the farthest 1/2" panel to the right, attach a piece of Tear & Tape.


  • Fold the scored lines to make a window for the DSP. Attach the Tear & Tape to the front panel of the card so that the window is 1/2" high on the right and the left.
  • Adhere one of the trucks to the front of the window.
  • When the card is close it does not cover the inside of the card. To give the card a full front, adhere the 4" x 5-1/2" piece of Boho Blue over the partial front. Be sure to only put adhesive on the partial front piece.
  • Adhere the second DSP panel to the front of the card.
  • Adhere the Basic White panel to the inside of the card front.
  • Stamp the greeting on the smallest Deckled Rectangle die (the DSP) piece.
  • To give it strength, adhere the smallest Basic White Deckled rectangle die to the DSP piece.
  • Attach greeting and the truck to the front of the card with Stampin' Dimensionals. The greeting is askew.
  • Color a piece of white Bakers Twine with the Light Lost Lagoon Stampn' Blend.
  • Tie twine in a bow and attach with a glue die.
  • Add three Adhesive Backed Snowflakes.
  •  This card folds down to fit in a standard A2 envelope. Enjoy! 
Click on any of the pictures below to see details about the products used and to link directly to my Stampin' Up store!

Product List

Friday, August 4, 2023

 Off-set Gatefold Card



Stampin' Up! Supplies

The Paper:

  • Berry Burst: 8-1/2" x 5-1/2", scored at 1-1/2" and 5-3/4" on the long side
  • Masterfully Made Designer Series Paper (DSP): 2-1/2" x 5-1/4",
  • Masterfully Made DSP: 1-3/8" x 5-1/4"
  • Coordinating DSP: 3" x 3"
  • Basic White: 3-1/8" x 3-1/8"
  • Basic White: 4" x 5-1/4"
  • Basic White: scrap
  • Pretty Peacock: scrap
The Stamps and Stamp Pads:
  • Gorgeously Made Stamp Set
  • Pretty Peacock Classic Stampin' Pad
Cutting Tools:
  • Gorgeously Made Dies
  • Paper Trimmer
Adhesives:
  • Multipurpose Liquid Glue
Other:
  • Stampin' Cut and Emboss Machine
  • Tinsel Gems Four Pack
Instructions

  • Die Cut leaf element with Gorgeously Made Die from Basic White scrap.
  • Die Cut label in both Basic White and Pretty Peacock.
  • Stamp Sentiment on Basic White label.
  • Cut the Pretty Peacock label in half. Extend the white label by gluing each half of the Pretty Peacock label behind the Basic White label.
  • Glue the two square pieces together.
  • Glue the two DSP pieces to the two front panels of the card.
  • Glue the leaf element onto the square piece.
  • Center the square panel on the front of the card. Glue down to one side panel only, leaving part of the square overhanging the edge.
  • Glue the label on the front of the card. Glue down to one side panel only, leaving part of the label overhanging the edge.
  • Attach three gems to the front of the card.
  • Stamp the inside panel with a sentiment and leaf from the Gorgeously Made stamp set.
  • Adhere panel to the inside of the card.
Click on any of the pictures below to see details about the products used and to link directly to my Stampin' Up store!

Product List

Humble Home Thank You Card

 Humble Home Thank You Card Stampin' Up! Supplies The Paper: 2024-26 In-Color 6" x 6" Designer Series Paper: 4" x 5-1/4&q...

Popular Posts Title